Carbon friction ring |C-Tech®

Extra-Wide Guide Ring for Halyard and Sheet | C-Tech XL® Carbon

The C-Tech XL ring is an ultra-lightweight maneuvering guide designed for deck plan organization. Ideal as a sheet support, a line guide or a mast guide, it keeps your ropes in position without taking up too much space. Caution: This product is a holding guide and not a structural friction ring designed to take heavy loads.

Violin pulley | BF-D® Block-Friction

Nodusfactory's Block-Friction® FrD duralumin anodized pulley is a top-of-the-range product offering numerous advantages in terms of performance, durability and ease of use. Exceptional strength-to-weight ratio (10 times lighter than a pulley), designed for high static loads. Block-Friction® pulleys can be used for 3:1 or 4:1 downhaul or mainsail hoists, as well as for cunningham adjusters or sheet point hoists on larger boats. Our violin pulleys are perfect for applications requiring low rope movement (speed) and low angle (the greater the deflection, the greater the friction).

Friction ring | P-Tech®

Fr P-Tech® , Nodus Factory™ rings are self-lubricating, very light and reliable.   They can be used in many applications with any type of non-abrasive rope: Static use : low friction speed, P-Tech (Low friction) Dynamic use : high friction speed, P-Tech C (High friction)   Find out more about load forces as a function of deflection angle HERE Materials: Polymer

Block friction ring| Ring-Nub®

Ring-Nub® is an open spherical low-friction ring that withstands very high loads and is available for strings from 3 mm to 12 mm maximum. Ring-Nub offers a unique combination of advantages in terms of performance, durability and ease of use. It's an excellent choice for applications where friction must be minimized and strength maximized. See examples of NUB® low-friction ring applications with textile connectors (textile shackle, loop, erse, lock and hook) in the category PLUG & SAIL .

Friction ring | ROPEYE

ROPEYE low-friction rings in hard-anodized aluminum - top-of-the-range boat fittings for optimum performance and durability. Ideal for all your nautical accessories.

Block friction ring| Ring-Nub®

Ring-Nub® is an open spherical low-friction ring that withstands very high loads and is available for strings from 3 mm to 12 mm maximum. Ring-Nub offers a unique combination of advantages in terms of performance, durability and ease of use. It's an excellent choice for applications where friction must be minimized and strength maximized. See examples of NUB® low-friction ring applications with textile connectors (textile shackle, loop, erse, lock and hook) in the category PLUG & SAIL .

Low Friction Ring carbon thimble | Friction ring thimble

Reinforced DIN 3091 thimble : performance and durability for your ropes The reinforced DIN 3091 thimble is an essential element for reliable, long-lasting rope connections. Versatile and high-performance, it offers numerous advantages: C-Tech Carbon ring with wide passage for adaptation to all types of ropes Low Friction Self-lubricating C-Tech® technical polyamide for reduced friction and improved performance 30% carbon for increased strength and exceptional longevity Complies with DIN 3091 standard for optimum safety Easy to use, it can be fitted and removed quickly without special tools.

Friction ring | Wichard

Wichard FRX friction rings are simple, highly resistant and therefore designed for heavy loads or light traffic: backstays, mainsail lowers, barberhaulers.... It's also a compact, lightweight, non-aggressive piece of rigging for your deck, your mainsail lazy-ropes... Wichard has maximized the lifespan of its FRX ring range thanks to: - a shape optimized for rope circulation, - the treatment of aluminum by hard anodizing to 50 microns. .

Through-hull friction ring for gluing - Hull-Ring®

Hull-Ring® is a low-friction through-hull ring designed to be bonded directly to laminate hulls, bulkheads and decks. Key features: "Drill, glue, sail...". Material: PA11 carbon, offering good strength and lightness. Installation: Direct bonding to laminate surfaces. Low friction: Designed to minimize friction losses when passing ropes. Versatile use: Can be used as a chainplate, pass-through spinner or pad-eye (with a dog bone).

Trapeze spoon in Dyneema®| Textile-Trap®

Trap®, trapeze spoon with low friction ring to facilitate the use of the boom height adjustment (hoist 1/2) The Loop Dyneema® R2 trapeze spoon & Nodus low friction ring made of M3 technical resin is easy to use, very light and resists heavy loads. Material: Dyneema® / UHMWPE / Polymer / PEEK

Violin pulley | Mickey-Rings® 3D adjustment

BF-M®, the 3D Mickey-ring fiddle block is a set of 3 connection points, ideal for efficient 3D adjustment of the genoa tack. Lightweight and compact, the multiaxial 3D fiddle block allows perfect alignment of connections at different angles, with each friction ring rotatable and movable (10 times lighter than a pulley), designed for heavy loads.< Easy to set up, this multiaxial 3D friction ring system rotatable up to 180° will produce minimum friction and wear on your ropes. They can be used for just about anything and with any type of rope, although beware that some Technora® ropes have an aggressive grip.

Versatile Textile Barber-hauler | Sprit-Loop Nodusfactory

Le Sprit-Loop: L'Estrope Volante Haute Performance by Nodus Factory Discover the Sprit-Loop , a hybrid textile rigging solution designed to offer total freedom in your deck settings. Inspired by the kinematics of the livarde and the efficiency of modern barbers-haulers , this product combines a technical estrope, a T-close textile connector and, optionally, a low-friction ring or a pulley . Whether for use at the mast foot, on a fargue track or as a trim hoist for headsails, the Sprit-Loop is the essential tool for optimizing your pulling angles without the weight or constraints of traditional metal fittings.

Open friction ring |Hook®-Tech

Versatility: The Hook® open friction ring is a versatile solution for a wide range of applications. It can be used for sheet control, sail trimming, hoist creation and much more. Ease of use: The Hook® open friction ring is easy to use and install, requiring no special tools. It requires no special tools. Performance and durability: The Hook® open friction ring is built to last. It is made from high-quality materials that are UV, water and weather resistant.

Friction ring pulley | Hook-Nub

The Hook-Nub® pulley is a low-friction, high-load pulley for ropes from 6 mm to 16 mm maximum. It offers a unique combination of advantages in terms of performance, durability and ease of use. It is an excellent choice for applications where friction must be minimized and strength maximized. It differs from the Ring-Nub ring in that it has 3 retaining clips for rope or textile connectors on one side.

Friction ring 70 mm / 28 mm black R28.20 | Antal

Designed for static-load applications, the Antal low-friction ring features simple design and low weight. It offers optimum performance in hoist and stunt mounts, particularly for boom vang, backstay or genoa trimming. Used in high-strength aluminum, the ring receives a polished hard-anodized surface treatment, ensuring maximum reduction of the coefficient of friction and enhanced wear resistance.

Friction ring 20 mm / 8 mm ORANGE | ALLEN

Aluminum high-load friction rings (also known as low-friction rings, drop rings, lead rings, hard eyes or simply lugs) are an excellent alternative to traditional blocks, especially for applications requiring high static load capacity.