

EMERGENCY LADDER
Easy to set up and use,
Designed to climb aboard alone and in complete safety.
SIMPLICITY AND RELIABILITY
Easy to fit on the side of the stern stanchion, making a lark's head shape,
Operation is simple and safe:
The cord is activated from the water and triggers ladder deployment,
When fully deployed, at least 3 rungs plunge into the water,
Wide rungs with semi-rigid reinforcements make it easy to climb back aboard.
Simple installation and removal for winter storage
FOR EVEN GREATER SAFETY AND VISIBILITY
New SOLAS-standard retroreflective tape
The end now contains reflective filaments and is attached directly to the ladder to create a lifeline, allowing you to hold on to and get closer to the ladder as well as the boat when it's in motion.
Installation: Lark head attachment, hinged case, flap and snap closure, fluorescent strip, cord release, 9 or 11 rungs depending on model, 2nd flap on back of case closed with 40mm stainless steel screw/nut.
Materials: ladder in polyester webbing with semi-rigid or rigid (depending on model) polyethylene reinforcements, case in high-resistance polyester with 2-sided PVC coating, polyethylene back and polypropylene webbing edging.
Ref ES27295,9E,TA > 18/10th polyethylene rung reinforcements
Ref ESR27350,11E,TA > rigid rungs consisting of 2 acrylic rods diam 8mm in a webbing sheath
Reference : ES27295,9E,TA
Catalogue number: ESR27350,11E,TA
EASY BOARDING
The length of the ladder makes it suitable for most boats on the market.
The ladder is specially designed to dive into the water on its own. To facilitate the start of the ascent, there must be at least 3 rungs in the water.
The width, spacing and reinforcements of the rungs have been specially designed to facilitate boarding.
The Sail-fuse® Nodus Factory™ textile shock absorber is an innovative load fuse and mainsail damper. It is designed to protect your mainsail and rig in the event of an impromptu gybe or sudden gust of wind. How it works: The Sail-fuse® is made of extremely strong Dyneema® textile webbing. It incorporates an energy absorber that breaks when the load on the mainsail exceeds a certain threshold. This dissipates the impact energy and prevents major damage to your yacht. Uses: The Sail-fuse® is easily installed between the boom and the mainsail hoist. It is designed for use on all types of sailboats, from small dinghies to large racing boats.
Adjustable fender cleat for boats | T-bat®
T-bat® is an innovative solution for quickly and easily attaching fenders to dies. This textile device allows precise installation and adjustment in seconds, without the need for complex knots. Versatility: T-bat® is compatible with a wide range of fenders and tusks, as well as with different die diameters. Easy to use: Pass the estrope around the die. Cover the T-bat® locking piece with the loop of the textile tie. Slide the connector to the desired height. Take up and tighten the tie, then release it to lock the connector.
Guardline Protection| Outil Océans
Guardline protectors from Outil Océans Outils Océans guardlines are designed to protect your guardrails and stays from abrasion and wear. They are made from durable, weather-resistant materials and are available in a variety of sizes and colors to suit your needs.
Magic-Mât mast ladder | Outils-Océans
Safe access to the top of the mast! Outil Ocean's Magic-Mât ladder is the easiest way to climb the mast . Alternating rungs and a polyethylene-lined "platform" at the top ensure optimum comfort and safety. The ladder is available in lengths of 3, 7 or 9 meters.
Turnbuckle Protection | Outils Oceans
Turnbuckle protection from Outil Océans for your sailboat Protect your turnbuckles and rigging from the weather conditions with our turnbuckle protectors designed to last. Features: Velcro fastening: quick and easy installation, no tools required. Body made from high-strength polyester fabric, PVC-coated on both sides for optimum protection against UV, salt water and abrasion. Polypropylene webbing edging, for extra protection and a durable finish.
Skipper comfort cushion | Lab-one®
Lab One® , a specially designed ball cushion for comfortable support when heeling. Pressure exerted on the seat compresses the upholstery to create the backrest support. Sitting on Lab One® , you can fidget or concentrate on your navigation... But whatever position you adopt, it adapts to your every need. Its secret? Expanded polystyrene beads encased in a vinyl bag, so small that when piled up together, they mould perfectly to the shape of the body. Material: Water-repellent acrylic fabric Filling Process