Secure payment Credit 
Customer Service
Cart
0
€0.00
A "single or multiple" fairlead with very low friction for improved performance, less friction and longer rope life for less wear.
Specifically designed to be screwed or glued to the deck.
Available in 2 materials, Aluminium 7075 T6 and C-Tech.
See features below
Secure payment Credit
Customer ServiceApplications
Halyard, sheet, furling line, sheaves, deck plan improvement
Ø 12 mm maximum rope
The line is used to guide and/or slightly deflect sheets, halyards or other lines on the deck of the sailboat.
The Nodus Factory multiple fairlead is available with 1 to 6 ends for yachts from 6 to 15 metres.
Assembly
Fixing by screwing or gluing (Option)
1- Prepare and clean the surface.
2- Drill Ø 5 mm holes or tap.
3- Mix and apply the two-component adhesive
4- Glue and maintain pressure for at least 5'.
Wait 24 hours before use
Deck Fairlead for gluing or screwing on:
Available in two materials
Subbase :
Fixings :
Advantages of Nodus Factory deck guides
Nodus Loc® Bi-component glue 12 ml. Note: 1 tube allows to glue 4 to 6 Pads (Padeye : Pad Sx - Pad Race - Pad Hook).
Bolt-Down Fairlead Nodus Factory | FA® et FP®
A "single or multiple" fairlead with very low friction for improved performance, less friction and longer rope life for less wear. Specifically designed to be screwed or glued to the deck. Available in 2 materials, Aluminium 7075 T6 and C-Tech.
Fairlead with Block | Padeye Pad-Poulie®
The HI-Tech® Pad-Pulley is an innovative fairlead with a self-aligning ball pulley. Its unique design with a textile axle, automatically aligns your sheet for minimum friction. Uses : For sheets and lines from 4 mm to 10 mm maximum Sheet line Furling line Returns Deck layout improvement Option : Nodus Loc® glue - 1 tube (12ml) for 4 to 6 pads Materials: Composites / PA / Dyneema® / bioplastic polyamide (recyclable) Nodus Loc
Sheet fairlead Aluminium | Pad-fairlead D®
The FrD® Pad-filoir in Pa carbone with FrD friction ring in duralumin is a compact and versatile friction block system designed for use in a variety of applications. Versatility: Deflecting sheets and halyards on sailboats. For deck-mounted furling lines or as a replacement for stanchion blocks. Option : Nodus Loc® glue - 1 tube (12ml) for 4 to 6 pads Nodus Loc Materials: PA / Dyneema® / fiber-reinforced bioplastic polyamide (recyclable) / Aluminum 7075
Mast fairlead to be glued | Pad-Filoir® I-Tech
Pad-filoir®, mast fairlead to be glued : Halyard and furling line guides Indispensable when installing a headsail furler or spinnaker halyard , the pad's carefully designed shape allows a lateral deviation of +30° (left or right). Simple, robust, effective: the Pad-filoir® guides your halyards and ropes for easy sailing. Perfect for headsail furlers or spinnaker halyards. Features: Easy assembly: glue or screw (screws not included). Optimum guidance: lateral deflection up to 30° (left/right). Resistant: Pa11 carbon against wear, weather and UV. Adaptable: Ø halyard/rope max 12 mm. Nodus Loc
Anneau à friction passe coque à coller - Hull-Ring
Hull-Ring® is a low-friction through-hull ring designed to be bonded directly to laminate hulls, bulkheads and decks. Key features: "Drill, glue, sail...". Material: PA11 carbon, offering good strength and lightness. Installation: Direct bonding to laminate surfaces. Low friction: Designed to minimize friction losses when passing ropes. Versatile use: Can be used as a chainplate, pass-through spinner or pad-eye (with a dog bone).
A "single or multiple" fairlead with very low friction for improved performance, less friction and longer rope life for less wear.
Specifically designed to be screwed or glued to the deck.
Available in 2 materials, Aluminium 7075 T6 and C-Tech.
Français 
English 
Español 
Deutsch 
Italiano 