Mast fairlead to be glued | Pad-Filoir® I-Tech

20188B

Pad-filoir®, mast fairlead to be glued : Halyard and furling line guides

Indispensable when installing a headsail furler or spinnaker halyard, the pad's carefully designed shape allows a lateral deviation of +30° (left or right).

Simple, robust, effective: the Pad-filoir® guides your halyards and ropes for easy sailing. Perfect for headsail furlers or spinnaker halyards.

Features:
Easy assembly: glue or screw (screws not included).
Optimum guidance: lateral deflection up to 30° (left/right).
Resistant: Pa11 carbon against wear, weather and UV.
Adaptable: Ø halyard/rope max 12 mm.

Nodus Loc

See features below

Volume discounts

Quantity Discount You Save
2 5% Up to €2.48
4 10% Up to €9.94
€24.84
Quantity

  • Secure payment Secure payment
    Credit Card - VISA - MasterCard - Paypal
  • Customer Service Customer Service
    +33 2 97 67 64 83 - 9 am to 5 pm

Description

Pad-filoir® for furling line and spinnaker halyard.

The Pad-filoir® is a nautical accessory designed to guide your halyards and ropes on your boat. It is particularly useful for installing a headsail furler or for a spinnaker halyard.

Features :

  • Simple assembly: The Pad-filoir® can be glued or screwed (screws not supplied) to a mast, boom or deck.
  • Efficient guiding: Its specially designed shape allows a lateral deviation of +30° (left or right), guaranteeing optimal guiding of your ropes.
  • Robust and durable: Made from I-Tech® resin, the Pad-filoir® is resistant to wear, weather and UV rays.
  • Adaptable: It can accommodate halyards and ropes up to 12 mm in diameter.

Data sheet

  • Robust and extremely high quality, made of low-friction technical polymer, ensures easy sliding of the rope and exceptional durability
  • Easy to install by simple gluing, or with 2 screws (not included)
  • An essential piece of hardware for the installation of a headsail furler or spinnaker halyard, the rigging screw's shape allows a lateral deviation of + 30° (left or right).
  • Glueing line, halyard lead, sheet and furling line of Max 10/12 mm

Nodus & Tip

I-Tech® low-friction spinners have a non-adhesive surface due to their production design and the material used. Friction is dynamic without loss of energy.

The contact surface creates an angle of friction that limits adhesion at the beginning of the maneuver and improves glide performance.

The best glide is not smooth!

Product Details

Advantage

  • Very good wear resistance
  • Excellent coefficient of friction
  • Suitable for very high speeds
  • Self-lubricating and maintenance-free
  • Low moisture absorption
  • High resistance to chemical agents
  • Resistant to knocks and shocks